Flagship OEM LED strip controller

flex PRO — 6-in-1 Bluetooth LED Controller

One SKU. Six LED modes. The MESHLE flex PRO 3 is a Bluetooth Mesh LED strip controller that switches between RGBCCT, RGBW, RGB, CCT, single-color, and multichannel dimmer via the Prog button — no firmware reflash, no separate inventory. One part number covers every LED strip configuration on your line.

Download datasheet
MESHLE flex PRO 3 — 5-channel PWM Bluetooth LED strip controller for RGBCCT, RGBW, RGB, CCT, single-color, multichannel dimmer
6:1 device6 modes, one controller
480Wmax output, 12–24V DC
15Aper channel, 20A total max
Why flex PRO 3

One controller, every LED configuration

One SKU, six LED modes

Press Prog to switch between RGBCCT, RGBW, RGB, CCT, single-color, and multichannel dimmer. No firmware reflash, no separate part numbers. Stock one controller, target every LED-strip configuration your line ships.

Free white-label app, no licensing fee

Ship MESHLE Bluetooth Mesh under your own brand. Fully white-labeled iOS and Android builds — your name, logo, design — at no licensing fee, no per-install cost.

Local-first, works without cloud

The full MESHLE Bluetooth Mesh stack runs on-device. Scenes, schedules, and swarm automations execute locally. Add MESHLE Gateway for Matter or BMS integration when needed — never required.
Inside the controller

LED strip wiring built for fast, tool-less installation

Lever-clamp terminals, mode-switch button, indicator LED, optional sensor input, and a white-label-friendly housing — every detail engineered for the line.

Close-up of MESHLE flex PRO 3 input terminals showing lever clamps and DC jack
View specifications
Specifications

6-in-1 controller, built for OEM integration

Each flex PRO 3 ships as a 5-channel PWM controller, mode-switchable between RGBCCT, RGBW, RGB, CCT, single-color, and multichannel dimmer. MESHLE Bluetooth Mesh module pre-integrated. FCC and CE pre-certified, ready for your luminaire bill of materials.

MESHLE flex PRO 3 (568P-3)

Input voltage
12–24V DC (constant voltage)
Output channels
5 PWM channels — mode-switchable: RGBCCT / RGBW / RGB / CCT / Single color / Multichannel dimmer
Output current
15A per channel, 20A total max
Maximum power
480W
Dimensions
108 × 45 × 18 mm, white housing
Connectors
Lever-clamp terminals, common-anode (tool-less wiring)
Wireless range
30–40 m outdoor / 10–25 m indoor
Protection class
IP20 (indoor)
Dimming
PWM, flicker-free
Wireless
MESHLE Bluetooth Mesh (Bluetooth 5)
Network size
Up to 250 nodes per network; multi-network unification with MESHLE Edge
Certifications
FCC, CE pre-certified
OTA updates
Yes — settings preserved across firmware revisions
Model code
568P-3
MESHLE App

Dual color wheel in the MESHLE App

Every MESHLE device with the RGBTW Interface exposes two color wheels side by side. Use the RGB wheel to pick any hue and adjust saturation, or switch to the CCT wheel to dial in the exact warm-to-cool white temperature — plus a shared brightness control that applies to whichever wheel is active.

Save your favorite colors and white tones, apply them instantly, and group multiple lights to set an entire room with a single tap. The MESHLE App is free for iOS and Android — no account registration required.

Explore RGB + Tunable White interface
RGB color wheel in the MESHLE App
MESHLE App showing the RGBTW interface with an RGB color wheel and a separate CCT wheel for tunable white
Pick your mode

Which mode drives your LED strip

The same flex PRO 3 maps its five PWM channels to whatever tape you're running. Set the mode at install time with the Prog button — here's which mode each LED strip type needs.

RGBCCT mode

Full five-channel mixing for RGB + tunable white strip in one run. Drives premium RGBCCT LED strip where you need saturated color and warm-to-cool white from a single controller — architectural coves, feature walls, and color-changing facades.

RGBW mode

The RGBW controller setting drives RGB + dedicated white tape, so whites stay clean instead of being mixed from color channels. Ideal for an RGBW LED strip in retail, hospitality, and accent lighting that needs both vivid color and true white.

RGB mode

A three-channel RGB LED strip controller for classic color tape. Run scenes, fades, and synchronized animations across an RGB LED strip over MESHLE Bluetooth Mesh — entertainment, signage, and dynamic color washes without a separate hub.

CCT mode (tunable white)

Two-channel tunable-white control for warm-to-cool CCT LED strip and 24V constant-voltage linear bars. Native Human Centric Lighting — shift color temperature on a schedule across coves and architectural channels, no DALI bus required.

Single-color / dimmer mode

A single-channel smart LED strip controller and dimmer for one-color tape — cove, stair, under-cabinet, and accent runs. Flicker-free PWM dimming, app-controlled and offline-first, coordinated across up to 250 nodes per network.

Multichannel dimmer mode

Maps each of the 5 PWM channels to an independent single-color load, so one multichannel LED dimmer controls several separate white or single-color zones — multiple rooms or fixtures — at their own brightness. Flicker-free PWM, app-controlled, and offline-first.
Where flex PRO 3 ships today

One LED strip controller across every line you build

RGB, RGBW, and RGBCCT LED strip

Drive 12–24V color tape — RGBCCT, RGBW, or RGB — from the same flex PRO 3. 480W headroom covers extended runs; switch modes per SKU without changing part numbers. White-label your strip line as a complete MESHLE Bluetooth Mesh ecosystem under your brand.

Tunable-white strip and 24V CV linear bars

Set flex PRO 3 to CCT mode for warm/cool tunable-white LED tape and 24V constant-voltage rigid linear bars in continuous coves and architectural channels. One controller, one firmware, one app — Human Centric Lighting native, no DALI bus required.

Cove, stair, and under-cabinet strip

Set flex PRO 3 to single-color or dimmer mode for cove, stair, under-cabinet, and accent strip runs. Each segment coordinates over MESHLE Bluetooth Mesh — up to 250 nodes per network, no central controller needed.

Architectural RGBCCT installations

RGBCCT mode gives you full 5-channel mixing for synchronized animations across hundreds of nodes. The MESHLE timeline animation editor is unique to MESHLE — design once, recall by app, kinetic switch, or scene trigger.

Slim 18 mm profile for tight installations

The 108 × 45 × 18 mm flat housing fits inside backlit glass panels, illuminated signage, coffer recesses, and furniture integration where conventional CV drivers don't. Pick the LED mode the fixture needs — RGB, RGBW, single-color — from one stocked controller.

Wired switch and motion-sensor retrofits

Connect a wired wall switch, PIR motion sensor, or door contact directly to the auxiliary input. Local override and motion-triggered scenes run on the controller — no extra automation hardware, no cloud dependency. Useful for stair lighting, closets, hospitality scenes, and retail display cases.
More from MESHLE

Other Bluetooth Mesh color controllers

Different form factors, channel counts, and current ratings — all on the same MESHLE Bluetooth Mesh stack. Pick what fits your luminaire build.

View all color controllers
Frequently asked questions

Specifying flex PRO 3

Why is flex PRO 3 a 6-in-1 controller instead of separate RGB / CCT / RGBW SKUs?

Because OEMs shouldn't have to forecast LED-strip mix six months out. One stocked part number covers every configuration your line ships — RGBCCT, RGBW, RGB, CCT, single-color, multichannel dimmer. You commit later, scrap less, and respond to channel demand without re-ordering. The controller is identical hardware in every mode; only the channel mapping changes.

Can I change between RGB / CCT / RGBW after installation?

Yes. Hold the Prog button to factory-reset and re-select the mode — RGBCCT, RGBW, RGB, CCT, single-color, or multichannel dimmer. No firmware reflash, no laptop, no programmer. The same controller runs any of the six modes as needed.

Do I need a hub or gateway?

No — not for local control. The MESHLE Bluetooth Mesh runs end-to-end on the devices themselves. The MESHLE Gateway M602 is optional, used when you need Matter, Apple Home, Google Home, Alexa, REST API, MQTT, BACnet™, or Modbus integration.

Can I get my logo on the controller housing?

Yes. flex PRO 3 supports custom laser-printed branding on the housing — your logo, brand name, or part marking — at MOQ 500 pcs per design. Talk to engineering for artwork specifications and lead times.

Is custom firmware available?

Yes. Profile customization, feature work, and hardware modifications are routine MESHLE engagements. We act as a development partner, not a component supplier — German engineering, direct contact, long-term support. flex PRO 3 runs on a Bluetooth Mesh stack MESHLE has shipped since 2013, four years before the SIG standard.

What's the MOQ and lead time?

Standard MOQ for flex PRO 3 is 500 pcs with a typical lead time of around 4 weeks. Custom laser-printed branding on the housing is available at the same MOQ. Talk to engineering for current capacity and your specific BOM.

Does the flex PRO 3 work without WiFi, a hub, or the cloud?

Yes — flex PRO 3 works fully offline with no WiFi, hub, or cloud account. Scenes, schedules, and dimming run locally on MESHLE Bluetooth Mesh, device to device. The optional Gateway M602 only adds Matter, voice assistants, or BMS integration when you choose to connect.

Can it control an RGBW or RGB LED strip over Bluetooth?

Yes. As a Bluetooth LED controller, flex PRO 3 drives RGBW, RGB, RGBCCT, CCT, and single-color LED strip — you select the mode with the Prog button. The same five PWM channels remap to whichever LED strip type you wire in, controlled from the free MESHLE app.

What's the difference between RGBW and RGBCCT mode?

RGBW mode drives RGB plus one dedicated white channel for clean, true whites alongside color. RGBCCT mode adds a second white channel, so you get RGB plus tunable warm-to-cool white in a single run. RGBCCT needs five-channel strip; RGBW needs four.

Can I control the LED controller from a phone app?

Yes. flex PRO 3 is controlled from the free MESHLE app for iOS and Android — color, brightness, scenes, animations, and schedules. The app is fully white-label, so OEMs can ship it under their own brand with no licensing or per-install fee. No account or internet connection is required.

MESHLE product range

Explore more MESHLE products

flex MINI

flex MINI

Compact 5-in-1 RGBCCT LED controller

Learn More
SPI LED Controller

SPI LED Controller

Addressable SPI pixel LED controller

Learn More
flex ZERO

flex ZERO

Inventronics-compatible Bluetooth Mesh interface

Learn More
Human-Centric Lighting Driver

Human-Centric Lighting Driver

Tunable-white circadian lighting driver

Learn More
Matter Gateway

Matter Gateway

Bluetooth Mesh to Matter gateway

Learn More
Browse all products

One controller. Six LED modes. In your team's hands.

Three drivers, no NDA, no commitment. Validate the 6-in-1 mode-switching, OTA flow, and pairing range on your own bench.