MESHLE Dimmer Interface

Dimmer & Brightness Control

Smooth 0–100% brightness control with 255-step resolution for LED strips, retrofit lamps, and professional lighting. Fully automated, fully local — no cloud required.

Learn More
Hand holding iPhone showing MESHLE dimmer brightness slider at a desk with monitors
MESHLE App

Precise Dimming at Your Fingertips

Every MESHLE device with the Dimmer Interface gives you smooth brightness control from 0 to 100% with 255-step resolution. Drag the slider for instant, flicker-free response — whether you’re dimming a single downlight or an entire room of luminaires.

Choose between linear and Gamma 2.2 dimming curves to match your LED driver’s characteristics. Linear provides uniform steps; Gamma 2.2 concentrates more steps in the lower range where the human eye is most sensitive — resulting in natural, perceptually even brightness transitions.

MESHLE App showing brightness slider at 85% with device tabs and control toolbar
Multichannel Control

Up to 4 Channels, One Node

A single MESHLE dimmer node can control up to 4 channels independently. Each channel gets its own brightness slider, so you can set individual levels for different lights or zones from one device.

Each channel appears as a separate device in MESHLE Edge, so you get granular monitoring and control across your entire installation without extra hardware. Group channels across nodes, assign them to scenes, or automate each one individually.

MESHLE App showing four independent channel sliders at different brightness levels
Capabilities

What the Dimmer Interface Can Do

Every capability runs locally on the device — no cloud, no internet, no server.

Brightness Control

Set any light to an exact brightness between 0 and 100%. The 255-step resolution ensures smooth, flicker-free transitions — even at the lowest levels.

Scenes

Save the current state of one or multiple lights as a scene. Recall it with a single tap in the app, a physical switch, a schedule, or a rule — stored directly on the mesh nodes.

Animations

Choose from a predefined animation library or create up to 4 custom animations per device. Build smooth brightness transitions over time with the timeline-based editor.

Schedules & Timers

Up to 8 schedules per device, stored and executed locally on the node. Your lights follow their routine even without a phone or internet connection.

Rules (If-That-Then-That)

Create event-based automations that run directly on the device. Triggers include sensor events, time conditions, and device state changes — fully autonomous, no server needed.

Astro Function

Automate lights based on local sunrise and sunset times, calculated from GPS coordinates set during commissioning. Add configurable offsets and let the device adjust daily — no internet required.

Linking (Peripherals)

Pair battery-free kinetic switches and sensors to control brightness from anywhere — no wiring, no batteries needed.

Device Settings

Configure startup brightness, dimming curve, PWM frequency, and channel mapping. Copy settings to other devices with one tap.

Device Info

View device name, firmware version, current time, device type, and vendor. Rename devices and channels for easy identification.
Dimmer Compatibility

One Interface, Four Dimming Technologies

The MESHLE Dimmer Interface supports multiple dimming protocols. Choose the right type for your fixture — the MESHLE Bluetooth Mesh network handles the rest.

PWM

Pulse Width Modulation for direct control of LED strips and LED modules. High-frequency switching delivers smooth, efficient dimming without visible flicker.

Phase Dimmer

Leading and trailing edge dimming for retrofit installations. Min-max calibration lets you define the effective dimming range — set your own 0% and 100% points to eliminate flicker and dead zones.

DALI

Digital Addressable Lighting Interface for professional lighting systems. Multichannel DALI control through a single MESHLE node, bringing mesh automation to standardized fixtures.

0–10V

Analog voltage signal for legacy and industrial fixtures. A proven standard, now connected to the MESHLE Bluetooth Mesh network for scheduling, scenes, and remote control.
Compatible Products

Dimmer Products

MESHLE-compatible dimmer modules for LED strips, retrofit lamps, DALI fixtures, and analog lighting.

View All in Catalog

Ready to Upgrade Your Dimming?

Bring smooth, local brightness control to any installation with the MESHLE Dimmer Interface. No cloud. No compromises.

Contact UsView All Products
MESHLE Interfaces

Explore More Interfaces

Switch

Shutter

CCT / HCL

RGB

Coming Soon

RGBW

Coming Soon

RGBTW

Coming Soon