Open-plan office with circadian-tuned lighting; warm light at perimeter desks, cooler light over collaboration zones
Commercial / Offices

Smart Office Lighting on MESHLE Bluetooth Mesh

MESHLE Bluetooth Mesh tunes every desk, meeting room, and corridor to who's there, what they're doing, and how the day is unfolding. No central controller, no rewiring on tenant change.

Explore commercial hardware
20–60%Lighting energy saved with occupancy controls (LBNL industry data)
250Devices per MESHLE mesh network — no hub required
0Cloud, internet, or app dependency for daily operation
Spaces we light

Office Lighting Use Cases

From hot-desks to executive floors, MESHLE Bluetooth Mesh handles the lighting needs of every room type in a modern workplace — under one app, one network, one commissioning workflow.

  • Open-Plan Workstations
  • Meeting & Conference Rooms
  • Executive Offices & Boardrooms
  • Lobby & Reception
  • Kitchenette & Break Areas
  • Focus Rooms & Phone Booths
Floor plan visualisation showing meeting rooms, open desks, focus pods, and reception zones lit by a unified MESHLE mesh
Swarm Intelligence

Light That Lifts Around Active Desks

Most offices light the whole floorplate to serve the few people actually there. MESHLE Swarm flips that — fixtures sense presence locally and propagate to neighbours, so light concentrates around occupied desks while empty zones idle.

  • Anticipatory illuminationLights brighten ahead of someone walking down a corridor, then fade behind them — no walking into a dark cubicle bay.
  • Gradient comfortClosest fixtures go full output, neighbouring ones dim down softly, so occupied desks aren't islands in a dark room.
  • Energy aligned with useIndustry studies report 20–60% lighting energy savings from occupancy-based controls in offices (LBNL meta-analysis).
  • Live commissioningTune zones and propagation behaviour from a phone or tablet on-site — re-test, re-adjust, no truck roll, no software re-flash.
See how Swarm works
Daylight Regulation

Daylight Harvesting for Offices

Daylight is free — but only if artificial fixtures dim down to make room for it. MESHLE's mesh-native lux sensors monitor ambient light and adjust output continuously, so workstation brightness stays at target whether the sun is high or hidden.

  • Sensor-based regulation keeps task surfaces close to the EN 12464-1 office reference of 500 lx without manual override.
  • Industry studies report measured energy savings of around 28% from daylight harvesting in commercial buildings (LBNL field data).
  • Smooth, gradient transitions — occupants notice the room is comfortable, not that fixtures are responding.
  • Combines with Swarm and HCL natively — presence, daylight, and circadian curves negotiate on the mesh, no central controller required.
Daylight & sensor settings
Human Centric Lighting

Human Centric Office Lighting

Office workers spend most daylight hours indoors, where ceilings rarely deliver enough light at the eye to support a healthy circadian pattern. MESHLE's tunable-white profile shifts colour temperature and brightness on a 24-hour curve so indoor light tracks the day, not the room.

  • Cool, bright midday settings to support attention and reaction time during peak working hours.
  • Warmer, dimmer evening settings that ease the transition out of focus mode without harsh switch-offs.
  • Independent direct/indirect channels — task and ambient lighting can carry different white balances at the same time.
  • Curves stored on the mesh node — they keep running whether the cloud is up, the Wi-Fi is down, or the office laptop is shut.
Guest Control

Meeting Room Lighting Control.
No App Needed.

Conference rooms host clients, candidates, and contractors who shouldn't need an app, an account, or a five-minute walk-through to dim the lights. MESHLE Guest Control puts a QR code on the wall — scan, control, leave.

  • Browser-based Web App — no install, no Apple/Google account, no IT enrolment.
  • Temporary, room-scoped access — visitors only see the fixtures in the room they're standing in.
  • No passwords change hands — not the MESHLE Bluetooth Mesh credentials, not anything else. The QR itself is the access token: signed, time-bounded, and revocable without touching IT.
  • Hosts and IT keep full administrative control through the MESHLE App; guest sessions are layered on top.
See Guest Control
BMS Integration

Office Lighting BMS Integration

The MESHLE Gateway (M602) bridges the MESHLE Bluetooth Mesh to your building stack over LAN or Wi-Fi. Four open protocols at the Gateway, plus local options like openHAB and Node-RED. Matter-ready.

REST API

OpenAPI endpoints for dashboards, web clients, and custom workflows.

MQTT

Pub/sub messaging for cloud BMS, IoT platforms, and brokers.

Modbus TCP/IP

Wires straight into industrial PLCs and BMS controllers.

BACnet

The dominant BMS protocol across office buildings.

MESHLE Gateway M602 mounted in a building network rack

See office lighting run on MESHLE

Book a 30-minute walkthrough — we'll show you Swarm, HCL, daylight regulation, and Guest Control on real hardware, in real time, on your floor plan.